Our factory is located in Gongyi, China. Zhengxi High-speed Railway, Longhai Railway, Lianhuo Expressway, G310, S312 Yanhuang Expressway and Zhongyuan Road West Extension Expressway cross east and west, Gongdeng Expressway and S235 run through the north and south, and the transportation network is complete and convenient. Founded in 1999, the factory has successfully built three …
Product Description: Polyacrylamide (PAM) is one of the most widely used varieties of water-soluble polymers. It is divided into cationic polyacrylamide, anionic polyacrylamide and nonionic polyacrylamide. Because the structural unit of polyacrylamide contains amide groups, it is easy to form hydrogen bonds, which makes it have good water solubility and high chemical activity, and it is easy to obtain various …
The polyacrylamide flocculant produced by our factory is a high-molecular organic compound, most of which have a molecular weight of more than several million and some even close to 20 million. Therefore, their dissolution methods are very different from those of inorganic small-molecule iron salts and aluminum salt coagulants. Generally speaking, the following principles should be …
Method Of Use: After dissolving the PAC solid product with water at a ratio of 1:3, add 10-30 times of water to dilute to the required concentration before use. The optimal pH value of dosing is 3.5-5.0, choosing the optimal pH value to add can give full play to the maximum benefit of coagulation. The …
Polyacrylamide can be divided into “anionic, cationic and nonionic polyacrylamide” according to its ionic properties, but the properties of high molecular organic polymers can be divided into anionic and cationic. Although both cationic polyacrylamide and anionic polyacrylamide are used as flocculants in sewage treatment, they are different in effect and principle. What is the difference between the anion and cation of …
The Difference Between Anionic Polyacrylamide & Cationic Polyacrylamide Read More »
Precautions when using polyacrylamide: Test: The selection of polyacrylamide needs to be determined through tests. Choose the right manufacturer, the suitable model, molecular weight, degree of ionization, degree of hydrolysis, etc. The dissolved concentration of polyacrylamide: generally 0.2-0.5%, which should be determined through experiments according to the material characteristics and operating conditions. Mostly 0.2-0.3%. Good dissolution is the …
How does polyacrylamide solve the urban sewage problem? Read More »
The coal-washing process produces a large amount of wastewater. These wastewaters contain a large amount of suspended solids, coal slime and other organic matter, if they are directly discharged into the environment without treatment, they will cause serious pollution to the environment. Therefore, coal-washing plant wastewater must be treated to reduce the impact on the …
Application of polyacrylamide in coal-washing plant wastewater treatment Read More »
