Construction mud treatment process flow

Construction mud treatment is an inevitable link in construction engineering, its purpose is to remove solid particles and organic matter in the mud to purify water quality. Construction mud contains high concentrations of suspended particulate matter and organic matter, if not treated, will cause pollution to the environment. Therefore, the process of construction mud treatment is very important.

01 Preprocessing
First, the construction mud is pooled into a specific pool. By mixing the mud with a blender and adding a certain amount of water, it is changed into a flowable state. It is then sieved and precipitated to separate the solid and liquid parts.

02 Precipitation
Drain the mud into a deep enough pool and allow it to settle naturally, depending on the viscosity of the mud and the concentration of solid particles. In this process, gravity will gradually sink the solid particles, and the water will float on top.

03 Separation
After the second step is completed, the separated water is pumped out, leaving behind solid particles at the bottom, which are often referred to as mud cakes, which are then further separated using a centrifuge to reduce the moisture content.

04 Wastewater Treatment
In the process of mud treatment, a large amount of wastewater is produced. These effluents may contain high concentrations of suspended particles and organic matter that require further treatment to meet discharge standards. You can use polyacrylamide to treat this wastewater, polyacrylamide as a polymer organic matter, can effectively flocculate the suspended particles in the water together to form a larger floc, so that the impurities in the wastewater can be effectively removed, improving the transparency and water quality of the water, and finally meet the discharge standards.

05 Recycling
After treating the wastewater, it can be recycled. By using some techniques, such as filtration and distillation, the treated water can be reused in the preparation of construction mud, which can reduce the demand for water resources.

In construction projects, the successful implementation of mud treatment processes can not only protect the environment but also save time and costs. By using an efficient and environmentally friendly mud treatment process, construction companies can effectively control the treatment and cost of construction mud and improve efficiency.

Other related products:

Anionic Polyacrylamide

Cationic Polyacrylamide

Nonionic Polyacrylamide

If you want to know more product details, please contact us. Tel & WhatsApp & WeChat: +86 13838149798